If you need any help, please feel free to contact us
As global industrial investment continues to expand across the energy, petrochemical, water treatmen...
As global industrial investment continues to expand across the energy, petrochemical, water treatmen...
A process engineer at a polymer plant notices an 8.4 percent discrepancy in the daily material balance. The feed line to the reactor reports 1,800 m³/h of propylene gas at 1.1 bar and 30°C, but the u...
An engineer at a potable water treatment plant once saw the flow indication from a magnetic flowmeter and a clamp-on ultrasonic meter disagree by more than 10 percent. The immediate assumption was th...
A petrochemical facility in eastern China operated two flow meters in series on the same saturated steam header: a vortex meter downstream and a Coriolis mass flow meter upstream. For a full month th...
If you are sizing a flowmeter for a 10-inch steam line, a slurry line that keeps blocking, or a custody transfer skid, the flow rate equation is not a textbook exercise. The real question is whether ...
In a water treatment plant, the difference between accurate and inaccurate flow measurement shows up directly in chemical dosing, pump efficiency, and regulatory compliance. That is why engineers res...
In a gas distribution station, an operator may see two readings for the same pipeline: 2,500 kg/h on one display and 4,200 m³/h on another. Both instruments are correct, but they are answering differ...